# Typo in "Modbus: Read Node" doc page

**URL:** <https://forums.losant.com/t/typo-in-modbus-read-node-doc-page/2212>\
**Category:** Bug Report\
**Created:** [September 24, 2019, 8:57pm UTC](https://forums.losant.com/t/typo-in-modbus-read-node-doc-page/2212 "2019-09-24T20:57:56Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Nate\_Usher](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.losant.com/nate_usher/32/1049_2.png) [@Nate\_Usher](https://forums.losant.com/u/Nate_Usher)\
**Post date:** [September 24, 2019, 8:57pm UTC](https://forums.losant.com/t/typo-in-modbus-read-node-doc-page/2212/1 "2019-09-24T20:57:56Z")

</div>

On this page in the docs:

> **[Modbus: Read Node](https://docs.losant.com/workflows/data/modbus-read/)**
>
> The Modbus: Read Node reads multiple registers from Modbus-enabled PLCs.

> **type (Required):** one of the following types: `input-registers` , `holding-registers` , `discrete-input` or `coil` .

is incorrect, should read

> **type (Required):** one of the following types: `input-register` , `holding-register` , `discrete-input` or `coil` .

---

<div class="post-metadata">

**Author:** ![anaptfox](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.losant.com/anaptfox/32/873_2.png) [@anaptfox](https://forums.losant.com/u/anaptfox)\
**Post date:** [September 24, 2019, 9:09pm UTC](https://forums.losant.com/t/typo-in-modbus-read-node-doc-page/2212/4 "2019-09-24T21:09:17Z")

</div>

@Nate_Usher,

Yep! Looks like you are correct. Fixing now. Thanks 🙂

---

<div class="post-metadata">

**Author:** ![Nate\_Usher](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.losant.com/nate_usher/32/1049_2.png) [@Nate\_Usher](https://forums.losant.com/u/Nate_Usher)\
**Post date:** [October 27, 2019, 11:13am UTC](https://forums.losant.com/t/typo-in-modbus-read-node-doc-page/2212/5 "2019-10-27T11:13:46Z")

</div>

@anaptfox  
Missed an ‘s’ 😉