# Connect Line Across Data Gaps

**URL:** <https://forums.losant.com/t/connect-line-across-data-gaps/3264>\
**Category:** Help\
**Tags:** dashboard\
**Created:** [September 16, 2020, 1:43pm UTC](https://forums.losant.com/t/connect-line-across-data-gaps/3264 "2020-09-16T13:43:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lars\_Andersson](https://avatars.discourse-cdn.com/v4/letter/l/f05b48/32.png) [@Lars\_Andersson](https://forums.losant.com/u/Lars_Andersson)\
**Post date:** [September 16, 2020, 1:43pm UTC](https://forums.losant.com/t/connect-line-across-data-gaps/3264/1 "2020-09-16T13:43:01Z")

</div>

In the Time series Graph, if I select aggregation: “None”, I’m not able to deselect the check box “Connect Line Across Data Gaps”.

What is the reason for that?

---

<div class="post-metadata">

**Author:** ![anaptfox](https://sea1.discourse-cdn.com/flex015/user_avatar/forums.losant.com/anaptfox/32/873_2.png) [@anaptfox](https://forums.losant.com/u/anaptfox)\
**Post date:** [September 16, 2020, 2:42pm UTC](https://forums.losant.com/t/connect-line-across-data-gaps/3264/4 "2020-09-16T14:42:16Z")

</div>

@Lars_Andersson,

A “gap” would be when a point is missing from a defined resolution bucket. As in, on a 1-minute resolution, if I have data points for 12:00 and 12:02 but not 12:01 (zero state reports in that window), then there is a gap at 12:01. The checkbox tells the graph whether to visually represent that break in data or to connect a line straight through from 12:00 to 12:02.

When “NONE” aggregation is selected, that means there is no resolution to apply to the graph. Thus, no gap.